Nuvo-2510VTC

The Nuvo-2510VTC from Neousys is a fanless industrial PC with an Intel® Atom ™ E3845 quad-core processor.
Equipped with 2 IEEE 802.3at Gigabit Ethernet ports, the Nuvo-2510VTC can control 25W GigE and PoE IP cameras directly with a single standard CAT-5e. Together with an intelligent ignition power control and an integrated CAN bus, the Nuvo-2510VTC is ideal for light mobile applications such as mobile NVRs and mobile APNRs.
The Nuvo-2510VTC was developed for in-vehicle applications and supports a DC wide-range input and can therefore be operated directly with 12VDC or 24VDC vehicle batteries. It has intelligent ignition power control with selectable switch-on and switch-off delays and battery voltage monitoring. The Nuvo-2510VTC also supports an integrated CAN bus port that conforms to CAN 2.0A and CAN 2.0B. The CAN bus is the basis for many different types of vehicle protocols.
The Nuvo-2510VTC from Neousys offers 2 PoE + Gigabit Ethernet ports and 1 USB3.0 port for industrial cameras and IP cameras. 4 serial and 3 USB 2.0 ports are also available. For mobile applications that require data transmission, the Nuvo-2510VTC can install two 3G / 4G modules with USIMs in its 2 Mini-PCI Express (mPCIe) sockets. The Nuvo-2510VTC is ideal for your versatile in-vehicle applications.

High quality, fanless embedded computer
Equipped with an Intel® Bay Trail quad-core processor, the Nuvo-2510VTC shows a significantly higher performance than the previous models Atom D2550. This provides adequate computing power for many light-weight applications at a reasonable cost. With TDP (thermal design power), the on-board processor is only 10W, as well as the wide range of DC inputs. The Neousys Nuvo-2510VTC is also good for battery powered applications. In addition, there are many added-value features such as shock-absorbing assembly, ignition power control, high operating temperature, DC wide-range input. Whether for use in vehicles or for general applications, the Nuvo-2510VTC is an industrial fanless embedded computer of great value.

2x IEEE 802.3at PoE + connections
The Nuvo-2510VTC from Neousys integrates 2 Gigabit PoE + PSE ports that comply with the IEEE 802.3at standard. Each port can deliver up to 25.5W of power and simultaneously transmit data over a single CAT-5e / CAT-6 cable at up to 1000 Mb / s. The integrated PoE + ports support Pro-Port on / off. With the "Switch on / off per port" function you can reset the connected PoE PD devices. Thanks to the highly integrated design, the Nuvo-2510VTC can effectively manage the heat generated by the PoE circuit, making it a very stable, fanless embedded computer with PoE + PSE ports.

Built-in CAN bus port
The CAN bus is a vehicle bus standard that enables in-vehicle devices to communicate with individual ECUs or with each other without a host, and is widely used in various vehicles today. The Nuvo-2510VTC offers an integrated CAN bus port. The built-in CAN bus supports the bit rate up to 1Mbps as well as CAN2.0A and CAN2.0B. These two frame formats form the data link layer and physical layer of many CAN-based HLP, higher layer protocols such as ISO TP, J1939 and OBD. The integrated CAN bus is equipped with an SDK, which enables the sending and receiving of CAN bus messages with configurable CAN bus identification. By assigning different identifiers and data bytes, the Nuvo-2510VTC can process different CAN base HLPs.

• Manual Neousys Nuvo-2500-Serie

  
  

• Datasheet Neousys Nuvo-2510VTC