Productfeatures Neousys Nuvo-8208GC
- Two x16 PCIe ports for 250 W NVIDIA® graphic boards
- Up to 28 TeraFLOPS GPU performance (FP32 performance test)
- Supports Intel® Xeon® E-2176G / E-2124G processors
- Core™ i7 / i5 LGA1151 8th generation processors
- Up to 128 GB ECC / non-ECC DDR4 2133 (4x SO-DIMM) memory
- Two x8 PCIe ports
- One x4 PCIe ports
- One Gen3 PCIe ports
- Two GbE front ports
- 8 USB 3.1 front ports
- Two serial COM1/COM2 ports (RS-232/422/485)
- Two ports for hot-swappable 2.5-inch SATA hard drives / SSDs
- RAID 0/1 support
- One M.2 NVMe hard drive socket (form factor 2280)
- 8 – 35V DC wide-range input
- Robust operation at -25 °C – 60 °C (-13 °F – 140 °F)
- Patented Thermal design by Neousys
- Neousy's patented damping clamps
- Vibration-resistant up to 3 Grms (root mean square acceleration)
- Size (W×D×H): 235 × 360 × 185.5 mm
Available from stock!
- Order number: Nuvo-8208GC
- Manufacturer: Neousys
The Nuvo-8208GC from Neousys is the world's first dual-GPU platform developed for Vehicle PCs (Car-PC, Car computer). The graphics card slots are intended for two high-end NVIDIA® boards with 250 W power consumption each. They enable an enormous GPU performance of up to 28 TFLOPS (FP32 performance test) for applications in Autonomous driving, as well as for other GPU-accelerated applications with extremely high demands on computing power, e.g. Artificial intelligence (AI).
The recently developed power supply concept of the Neousys Nuvo-8208GC accepts input voltages in the range of 8 – 35 V and provides sufficient power for two 250-Watt GPUs. The built-in ignition control for delayed Switch-On/Off enables installation as a vehicle PC via the vehicles electrical board system.
The device only consumes about 120W without a graphics card and can therefore be operated perfectly with conventional power supplies in this form. For a 250W graphics card a power supply of 400W is required, for two graphics cards with 250W each a power supply with more than 700W is required.
The design of the Nuvo-8208GC follows the patented Neousys thermal design for heat dissipation, the damping clamps, which are also patented, and the innovative GPU mounting mechanism (patent is pending) supports the resistance against vibrations.
The Nuvo-8208GC is Neousys' answer to the steadily increasing demand for TeraFLOPS GPU platforms. Novel technical progress in energy supply, heat dissipation and mechanical damping facilitates the transfer of Artificial intelligence from research to industrial applications where reliability is important.
|Processor||Supporting Intel® Xeon® E and 8th/ 9th-Gen CPU (LGA1151 socket) |
- Xeon E 2176G/ 2278GE (8C/16T) / 2278GEL (8C/16T)
- i7-8700, i7-8700T, i7-9700E, i7-9700TE
- i5-8500, i5-8500T, i5-9500E, i5-9500TE
- i3-8100, i3-8100T, i3-9100E, i3-9100TE
|Memory||Up to 128 GB ECC/ non-ECC DDR4 2133 SDRAM (four SODIMM slots)|
|Graphics||Independent GPU via x16 PEG port, or integrated Intel® UHD Graphics 630|
|Chipset||Intel® C246 platform controller hub|
|AMT||Supports AMT 12.0|
|TPM||Supports TPM 2.0|
|Ethernet||1x Gigabit Ethernet port by Intel® I219-LM |
1x Gigabit Ethernet port by Intel® I210-IT
|Native Video Port||1x VGA connector, supporting 1920 x 1200 resolution |
1x DVI-D connector, supporting 1920 x 1200 resolution
1x DisplayPort connector, supporting 4096 x 2304 resolution
|Serial Port||2x software-programmable RS-232/ 422/ 485 ports (COM1/ COM2)|
|USB||4x USB 3.1 Gen2 (10 Gbps) ports |
4x USB 3.1 Gen1 (5 Gbps) ports
1x USB 2.0 ports (internal for dongle use)
|Audio||1x 3.5 mm jack for mic-in and speaker-out|
|Expansion Bus/ Internal I/O Interface|
|PCI Express||2x PCIe x16 slot@Gen3, 8-lanes |
2x PCIe x8 slots@Gen3, 4-lanes
1x PCIe x4 slot@Gen3, 1-lane
|M.2||1x M.2 2242 B key socket supporting dual SIM mode with selected M.2 LTE module|
|mini-PCIe||2x full-size mini PCI Express socket|
|SATA||2x hot-swappable HDD trays for 2.5" HDD/ SSD installation(support RAID 0/ 1)|
|M.2||1x M.2 2280 M key socket (PCIe Gen3 x4) for NVMe SSD or Intel® Optane™ memory installation|
|mSATA||2x full-size mSATA port (mux with mini-PCIe)|
|DC Input||2x 4-pin pluggable terminal block for 8V to 35V DC input and 1x 3-pin ignition control */ **|
|Dimension||235 mm (W) x 360 mm (D) x 185.6 mm (H)|
|Mounting||Wall-mounting with damping brackets|
|Operating Temperature||with 35W CPU and dual NVIDIA® 250W GPU |
-25°C ~ 60°C ****
with >= 65W CPU and dual NVIDIA® 250W GPU
-25°C ~ 60°C **** (configured as 35W TDP mode)
-25°C ~ 50°C ***/ **** (configured as 65W TDP mode)
|Storage Temperature||-40°C ~ 85°C|
|Humidity||10%~90% , non-condensing|
|Vibration||Operating, MIL-STD-810G, Method 514.6, Category 4; and 3 Grms, 5-500 Hz, 3 Axes|
|Shock||Operating, MIL-STD-810G, Method 516.6, Procedure I, Table 516.6-II|
|EMC||CE/ FCC Class A, according to EN 55024 & EN 55032|
** Max current for DC input is 30A (per PWR pin) and max power consumption for the system is 1000W.
*** For i7-8700 and i7-9700E running at 65W mode, the highest operating temperature shall be limited to 50°C and thermal throttling may occur when sustained full-loading applied. Users can configure CPU power in BIOS to obtain higher operating temperature.
**** For sub-zero operating temperature, a wide temperature HDD drive or Solid State Disk (SSD) is required.